ODD-1 Firmware Update Package
=============================

See `CHANGELOG.md` for version-specific information.

Firmware Update Instructions
----------------------------

1. Connect ODD-1 to your computer with a USB-C cable.
2. Go to SYSTEM > MISC and press USB DISK. ODD-1 will display the USB DISK MODE screen and is unresponsive until ejected from the host.
3. Open the newly-mounted drive on the host computer (it should be called "Untitled" or "ODD-1").
4. Drag the `firmware` directory to ODD-1. It should contain a file called `fw.bin`. If the `firmware` dirctory already exists on ODD-1, you may be prompted to overwrite it. Select "Yes" or "Overwrite".
5. Eject the drive from your host computer.
6. ODD-1 will ask if you want to update the firmware. Select YES to continue. This process should take about 1 minute.
7. Allow the process to complete, then reboot when prompted.

If you abort the process at any time before rebooting, ODD-1 will remain at the current firmware version. You will need to re-copy the `firmware` directory to re-start the update process.
